- Messages : 1219
- Remerciements reçus 173
gt-jerome écrit: Oublie les mod alors Sérieux, j'en ai trouvé aucun qui n'égalait les autos de base du jeu, certes y a une M3 E36 qui était passé par là pas trop dégueux, mais le reste, y avait toujours des trucs à redire et pas des détails comme dans les autos d'origine du jeu.
J'ai pas testé la Ford RS mais récemment la Shelby GT500, c'était affreusement mal fait, donc il faut vraiment juger le réalisme du jeu sur les autos officielles du jeu.
Connexion ou Créer un compte pour participer à la conversation.
Connexion ou Créer un compte pour participer à la conversation.
Connexion ou Créer un compte pour participer à la conversation.
Connexion ou Créer un compte pour participer à la conversation.
Connexion ou Créer un compte pour participer à la conversation.
Connexion ou Créer un compte pour participer à la conversation.
shokeus écrit: VERSION=1
[BASIC]
WHEELBASE=2.370 ; Wheelbase distance in meters
CG_LOCATION=0.41 ; Front Weight distribution in percentance
[ARB]
FRONT=45000 ; Front antiroll bar stifness. in Nm
REAR=14000 ; Rear antiroll bar stifness. in Nm
[FRONT]
TYPE=DWB
BASEY=-0.090 ; Distance of CG from the center of the wheel in meters. Front Wheel Radius+BASEY=front CoG. Actual CG height =(FWR+FBasey)+(RWR+Rbasey))/CG_LOCATION%
TRACK=1.457 ; Track width in meters (from pivot 3D placement of the 3d model of a wheel)
ROD_LENGTH=0.040 ; push rod length in meters. positive raises ride height, negative lowers ride height.
HUB_MASS=75.73 ; masse sospese anteriori
WBCAR_TOP_FRONT=0.4275, 0.14929, 0.2374
WBCAR_TOP_REAR=0.4275, 0.14929, -0.0366
WBCAR_BOTTOM_FRONT=0.449, -0.12671, 0.2459
WBCAR_BOTTOM_REAR=0.449, -0.12671, -0.0689
WBTYRE_TOP=0.11012, 0.19311, -0.01955
WBTYRE_BOTTOM=0.059, -0.12041, 0.01219
WBCAR_STEER=0.435, -0.087, 0.110
WBTYRE_STEER=0.059, -0.067, 0.140
TOE_OUT=0.0003 ; Toe-out expressed as the length of the steering arm in meters
STATIC_CAMBER=-3.7 ; Static Camber in degrees. Actual camber relative to suspension geometry and movement, check values in game
SPRING_RATE=100000 ; Wheel rate stifness in Nm. Do not use spring value but calculate wheel rate
PROGRESSIVE_SPRING_RATE=0 ; progressive spring rate in N/m/m
BUMP_STOP_RATE=150000 ; bump stop spring rate
BUMPSTOP_UP=0.055 ; meters to upper bumpstop from the 0 design of the suspension
BUMPSTOP_DN=0.025 ; meters to bottom bumpstop from the 0 design of the suspension
PACKER_RANGE=0.050 ; suspension travel in meters left by packers.
DAMP_BUMP=10600 ; Damper wheel rate stifness in N sec/m in compression
DAMP_FAST_BUMP=3800
DAMP_FAST_BUMPTHRESHOLD=0.060
DAMP_REBOUND=12375 ; Damper wheel rate stifness in N sec/m in rebound
DAMP_FAST_REBOUND=5485
DAMP_FAST_REBOUNDTHRESHOLD=0.120
[REAR]
TYPE=DWB
BASEY=-0.090 ; Distance of CG from the center of the wheel in meters. Rear Wheel Radius+BASEY=Rear CoG Actual CG height =(FWR+FBasey)+(RWR+Rbasey))/CG_LOCATION%
TRACK=1.503
ROD_LENGTH=-0.030
HUB_MASS=87.43
WBCAR_TOP_FRONT=0.32248, 0.07630, -0.0058
WBCAR_TOP_REAR=0.32248, 0.06838, -0.2214
WBCAR_BOTTOM_FRONT=0.43108, -0.16996, 0.4042
WBCAR_BOTTOM_REAR=0.43108, -0.16904, -0.1254
WBTYRE_TOP=0.12207, 0.11386, -0.065
WBTYRE_BOTTOM=0.09025, -0.15843, 0.00087
WBCAR_STEER=0.35688, -0.10500, -0.17501
WBTYRE_STEER=0.03025, -0.10000, -0.13076
TOE_OUT=-0.00120
STATIC_CAMBER=-1.2
SPRING_RATE=130000
PROGRESSIVE_SPRING_RATE=0
BUMP_STOP_RATE=150000
BUMPSTOP_UP=0.060
BUMPSTOP_DN=0.020
PACKER_RANGE=0.060
DAMP_BUMP=6017
DAMP_FAST_BUMP=3875
DAMP_FAST_BUMPTHRESHOLD=0.060
DAMP_REBOUND=10770
DAMP_FAST_REBOUND=4600
DAMP_FAST_REBOUNDTHRESHOLD=0.120
[GRAPHICS_OFFSETS]
WHEEL_LF=-0.032 ;Left front graphical offset of the wheel positioning in the x axis (width). + is left - is right movement
SUSP_LF=0.032 ;Left front graphical offset of the suspension positioning in the x axis (width). + is left - is right movement
WHEEL_RF=-0.032 ; Right front as above
SUSP_RF=-0.032 ; Right front as above
WHEEL_LR=0.02 ; Left rear as above
SUSP_LR=0.02 ; Left rear as above
WHEEL_RR=-0.02 ; Right rear as above
SUSP_RR=-0.02 ; Right rear as above
Connexion ou Créer un compte pour participer à la conversation.
Connexion ou Créer un compte pour participer à la conversation.
Connexion ou Créer un compte pour participer à la conversation.
Se7en écrit: Je trouve l'empattement, les voies, la hauteur, le poids mais de position du CG.
Mais ce n'est qu'un exemple d'information technique.
Connexion ou Créer un compte pour participer à la conversation.
Nous avons 362 invités et aucun membre en ligne